Harley Guys
- enforcer
- Joined a 650cc Club
- Posts: 1138
- Joined: Wed Feb 03, 2016 7:29 pm
- My Bike: 03 HD FLHT 01 Yamaha XVS650
Harley Guys
Tired of the slight rattle while the bike is idling?
Worried the auto tensioner you have will ratchet up too tight and cause more damage than it's worth?
Sick of the clunk into first gear?
Switch to a Hayden auto tensioner. You'll be pleasantly surprised.
Worried the auto tensioner you have will ratchet up too tight and cause more damage than it's worth?
Sick of the clunk into first gear?
Switch to a Hayden auto tensioner. You'll be pleasantly surprised.
Current rides: 03 HD FLHT & 01 Yamaha XVS650(BIP)
Former: 87 Suzuki VS700, 94 BMW K1100LT & 91 Honda CB250
I don't want to own them all, just ride them all.
Former: 87 Suzuki VS700, 94 BMW K1100LT & 91 Honda CB250
I don't want to own them all, just ride them all.
-
- Joined a 950cc Club
- Posts: 2152
- Joined: Mon Dec 15, 2014 11:33 pm
- My Bike: VS1400
- Location: NE FL
Re: Harley Guys
So you're saying that Hayden Enterprises makes a better auto tensioner than the Harley factory? How so? Just curious.
- enforcer
- Joined a 650cc Club
- Posts: 1138
- Joined: Wed Feb 03, 2016 7:29 pm
- My Bike: 03 HD FLHT 01 Yamaha XVS650
Re: Harley Guys
The Harley style tensioner is setup so that when there's slack in the chain it automatically ratchets up to take up the slack. Problem being, there need to be a sight amount of slack in the chain to compensate for heat expansion. What happens is it becomes too tight and translates that stress to either the compensator or the press fit crank.NE_FL wrote:So you're saying that Hayden Enterprises makes a better auto tensioner than the Harley factory? How so? Just curious.
That causes eventual destruction or one or both, usually the compensator.
What the Hayden does differently, in all Harley models by the way, is remove the ratchet. It uses a spring. You preload the tension and it keeps it tight while still allowing for expansion. It also compensates for wear on the nylon shoe. While it still needs adjusted from time to time, it's far less than a manual adjuster without the issues of the HD auto adjuster. I did extensive research before I made my mind up in changing it.
The only thing I found as a flaw is sometimes the spring breaks. If it does, you get excessive rattling. Call up Hayden and they'll send a new one free.
Current rides: 03 HD FLHT & 01 Yamaha XVS650(BIP)
Former: 87 Suzuki VS700, 94 BMW K1100LT & 91 Honda CB250
I don't want to own them all, just ride them all.
Former: 87 Suzuki VS700, 94 BMW K1100LT & 91 Honda CB250
I don't want to own them all, just ride them all.
- Suzuki Johnny
- Joined a 1200cc Club
- Posts: 33198
- Joined: Wed Dec 10, 2014 5:25 am
- My Bike: 2020 Tri Glide Ultra Harley
- Location: GODS COUNTRY
Re: Harley Guys
enforcer wrote:The Harley style tensioner is setup so that when there's slack in the chain it automatically ratchets up to take up the slack. Problem being, there need to be a sight amount of slack in the chain to compensate for heat expansion. What happens is it becomes too tight and translates that stress to either the compensator or the press fit crank.NE_FL wrote:So you're saying that Hayden Enterprises makes a better auto tensioner than the Harley factory? How so? Just curious.
That causes eventual destruction or one or both, usually the compensator.
What the Hayden does differently, in all Harley models by the way, is remove the ratchet. It uses a spring. You preload the tension and it keeps it tight while still allowing for expansion. It also compensates for wear on the nylon shoe. While it still needs adjusted from time to time, it's far less than a manual adjuster without the issues of the HD auto adjuster. I did extensive research before I made my mind up in changing it.
The only thing I found as a flaw is sometimes the spring breaks. If it does, you get excessive rattling. Call up Hayden and they'll send a new one free.
13 Harleys.. Hard to figure out exact mileage on them bikes...some I put more miles than others... but I'm figuring about 50K miles each so that rounds out to be somewhere in the neighbor hood of 600,000 total miles give or take a few thousand and not once...… not once in that entire 56 years of riding Harley's did I ever have to change a chain tensioner.....
duc, sequere, aut de via decede
"frapper fort, frapper vite, frappée souvent-- Adm William "Bull" Halsey
“We’re not going to just shoot the sons-of-bitches, we’re going to rip out their living Goddamned guts and use them to grease the treads of our tanks.”--Gen George Patton
"Our Liberty is insured by four "Boxes", the Ballot box, the Jury box, the Soap box and the Cartridge box"
"frapper fort, frapper vite, frappée souvent-- Adm William "Bull" Halsey
“We’re not going to just shoot the sons-of-bitches, we’re going to rip out their living Goddamned guts and use them to grease the treads of our tanks.”--Gen George Patton
"Our Liberty is insured by four "Boxes", the Ballot box, the Jury box, the Soap box and the Cartridge box"
-
- Joined a 250cc Club
- Posts: 516
- Joined: Wed Mar 02, 2016 4:58 pm
- My Bike: Ummmmmmmm a 1400
- Location: Flyover Country
Re: Harley Guys
Holy Necropost Batman.
If it ain't broke, fix it till it is.
If it ain't broke, fix it till it is.
- franktiregod
- Joined a 900cc Club
- Posts: 1818
- Joined: Tue Feb 21, 2017 10:54 am
- My Bike: SUZUKI
Re: Harley Guys
Do you have a TC? Just curious. Because I have heard of TC that went 60k or more with no issues then I have heard of some with 20k that had issues.Suzuki Johnny wrote:enforcer wrote:The Harley style tensioner is setup so that when there's slack in the chain it automatically ratchets up to take up the slack. Problem being, there need to be a sight amount of slack in the chain to compensate for heat expansion. What happens is it becomes too tight and translates that stress to either the compensator or the press fit crank.NE_FL wrote:So you're saying that Hayden Enterprises makes a better auto tensioner than the Harley factory? How so? Just curious.
That causes eventual destruction or one or both, usually the compensator.
What the Hayden does differently, in all Harley models by the way, is remove the ratchet. It uses a spring. You preload the tension and it keeps it tight while still allowing for expansion. It also compensates for wear on the nylon shoe. While it still needs adjusted from time to time, it's far less than a manual adjuster without the issues of the HD auto adjuster. I did extensive research before I made my mind up in changing it.
The only thing I found as a flaw is sometimes the spring breaks. If it does, you get excessive rattling. Call up Hayden and they'll send a new one free.
13 Harleys.. Hard to figure out exact mileage on them bikes...some I put more miles than others... but I'm figuring about 50K miles each so that rounds out to be somewhere in the neighbor hood of 600,000 total miles give or take a few thousand and not once...… not once in that entire 56 years of riding Harley's did I ever have to change a chain tensioner.....
I have a compensator going bad on mine right now at 40,000 miles.
I was going to use the Baker brand replacement. HD knows about this and the cam tensioner issue. They throw Band Aids at it from everything I have seen.
Why not just use a good quality part from the start? Makes no sense to me.
-
- Joined a 250cc Club
- Posts: 516
- Joined: Wed Mar 02, 2016 4:58 pm
- My Bike: Ummmmmmmm a 1400
- Location: Flyover Country
Re: Harley Guys
From what I can gather the TC cam tensioner issue was prior to 07. They went to hyd actuated and a roller chain. (I hope, I have a 07)
Primary tensioner seems to be a main't issue, shoe replacement from time to time.
Primary tensioner seems to be a main't issue, shoe replacement from time to time.
- hillsy
- Joined a 1200cc Club
- Posts: 8846
- Joined: Wed Sep 17, 2014 12:43 am
Re: Harley Guys
I know for sure the 06 had the issue with the tensioner that wore down from anywhere after 20k miles. My buddy got about 70k miles out of his before he rebuilt it. It was on borrowed time at that point.
-
- Joined a 1100cc Club
- Posts: 5526
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: Harley Guys
IMO, opening an engine, any engine, to replace internal parts, is NOT simply a "maintenance issue".
When internals break, that's called a failure.
When internals break, that's called a failure.
-
- Joined a 250cc Club
- Posts: 516
- Joined: Wed Mar 02, 2016 4:58 pm
- My Bike: Ummmmmmmm a 1400
- Location: Flyover Country
Re: Harley Guys
You are right breaking is failure. Wear items, not so much.
- hillsy
- Joined a 1200cc Club
- Posts: 8846
- Joined: Wed Sep 17, 2014 12:43 am
Re: Harley Guys
Here's how the spring loaded tensioners wear:
If / when they wear down to the pin then the whole thing grenades.
If / when they wear down to the pin then the whole thing grenades.
-
- Joined a 1100cc Club
- Posts: 5526
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: Harley Guys
Planned Obsolescence.
- hillsy
- Joined a 1200cc Club
- Posts: 8846
- Joined: Wed Sep 17, 2014 12:43 am
Re: Harley Guys
Probably more like they were not expecting anyone to put those sort of miles on one of their bikes so it would never be a problem.....navigator wrote:Planned Obsolescence.
-
- Joined a 1100cc Club
- Posts: 5526
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: Harley Guys
Just build it up with JB Weld, and slap it back together.
20K, 40K, or even 60K is not a lot of miles.
20K, 40K, or even 60K is not a lot of miles.
-
- Joined a 250cc Club
- Posts: 516
- Joined: Wed Mar 02, 2016 4:58 pm
- My Bike: Ummmmmmmm a 1400
- Location: Flyover Country
Re: Harley Guys
Ya know, I wonder now.
We never split cases on the 14s so I don't recall anyone talking about chain tensioners. They have to have a shoe of some sort I would think. I remember several scoots over 200k on the purple board with no engine issues.
We never split cases on the 14s so I don't recall anyone talking about chain tensioners. They have to have a shoe of some sort I would think. I remember several scoots over 200k on the purple board with no engine issues.
- hillsy
- Joined a 1200cc Club
- Posts: 8846
- Joined: Wed Sep 17, 2014 12:43 am
Re: Harley Guys
Travlin wrote:Ya know, I wonder now.
We never split cases on the 14s so I don't recall anyone talking about chain tensioners. They have to have a shoe of some sort I would think. I remember several scoots over 200k on the purple board with no engine issues.
If you mean the Intruder 1400's then the cam chain arrangement is totally different.
-
- Joined a 250cc Club
- Posts: 516
- Joined: Wed Mar 02, 2016 4:58 pm
- My Bike: Ummmmmmmm a 1400
- Location: Flyover Country
Re: Harley Guys
I just looked and yes they are different, of course but are still shoes that the chain runs against. After 33 years I wonder about the integrity of the material on mine.
- hillsy
- Joined a 1200cc Club
- Posts: 8846
- Joined: Wed Sep 17, 2014 12:43 am
Re: Harley Guys
Most Jap bikes run overhead cams which means the cam chains are far longer and the tensioners are slipper types that tension the chain over a 6 to 8 inch stretch. The HD tensioner in the pics above is only about an inch and a half so it's going to wear down pretty quick.
- franktiregod
- Joined a 900cc Club
- Posts: 1818
- Joined: Tue Feb 21, 2017 10:54 am
- My Bike: SUZUKI
Re: Harley Guys
Travlin wrote:From what I can gather the TC cam tensioner issue was prior to 07. They went to hyd actuated and a roller chain. (I hope, I have a 07)
Primary tensioner seems to be a main't issue, shoe replacement from time to time.
Depends on your definition of prior.
Yes in 07 they went to hydraulic but they STILL have problems. It just delays it a little longer. Now you start checking them around 60k instead of 20k as before.
So is that really fixed? Not in my book it isnt.
If the gear drive that is sold aftermarket is so much better that should be what HD puts in at the factory.
Maybe I am spoiled after decades of "jap bikes" but tearing into an engine with less than 100k is not a good thing. And its certainly not a bike that you would pay premium price for.
- hillsy
- Joined a 1200cc Club
- Posts: 8846
- Joined: Wed Sep 17, 2014 12:43 am
Re: Harley Guys
First off, changing the tensioner is not really tearing into the engine as such. Yes, there's a bit of stuff to remove to get to it but it's not like ripping off the heads or splitting the cases.franktiregod wrote:Travlin wrote:From what I can gather the TC cam tensioner issue was prior to 07. They went to hyd actuated and a roller chain.8 (I hope, I have a 07)
Primary tensioner seems to be a main't issue, shoe replacement from time to time.
Depends on your definition of prior.
Yes in 07 they went to hydraulic but they STILL have problems. It just delays it a little longer. Now you start checking them around 60k instead of 20k as before.
So is that really fixed? Not in my book it isnt.
If the gear drive that is sold aftermarket is so much better that should be what HD puts in at the factory.
Maybe I am spoiled after decades of "jap bikes" but tearing into an engine with less than 100k is not a good thing. And its certainly not a bike that you would pay premium price for.
Second about the gear drive is that if the crank flexes they can bind and destroy themselves. It's unlikely in a stock motor, but if you go for a bigger bore (like my buddy did) then it can become an issue.
The biggest problem with the spring loaded tensioner in the HD is you have no way to check it other than taking it out. You don't know how much its worn or when it will need replacement.