After my low side, I need some parts...
Tried to bend back my bent footpeg but the cheap potmetal snapped in half.
I need the right front foot peg, or the whole footpeg assembly.
I'd like to get the front right and left turn signals if I can find them for cheapish in decent condition
Also I could really use a front brake master cylinder.
I could get by without the turn signals, and I might be able to grind down the scratched up master cylinder until it works again, but I just don't want to mismatch the pegs and its killing me not riding my bike!
If anyone has the stuff, I'd happily pay market price + shipping.
Need VS1400 Front pegs/turn signals/front brake master cylinder
- mhodge
- Tricycles are Cool
- Posts: 18
- Joined: Fri May 12, 2017 6:41 pm
- My Bike: 2000 Suzuki Intruder VS1400
-
- Got My M1 License!
- Posts: 424
- Joined: Sat Oct 11, 2014 9:36 am
- My Bike: Vs800+c90
- Location: Ft Myers, Florida
Re: Need VS1400 Front pegs/turn signals/front brake master cylinder
I believe the pegs and M/C remained unchanged through the production life of your bike but the signals did change in '04 if I'm not mistaken. Is your bike an '04 or '03 and older?
I didn't have the parts your looking for but the info might help with getting the correct signals. The mounting is the same but in '04 Suzuki started using the bullet style housings. The earlier bikes used the flat style housings with two screws holding the lens on.
I didn't have the parts your looking for but the info might help with getting the correct signals. The mounting is the same but in '04 Suzuki started using the bullet style housings. The earlier bikes used the flat style housings with two screws holding the lens on.
- mhodge
- Tricycles are Cool
- Posts: 18
- Joined: Fri May 12, 2017 6:41 pm
- My Bike: 2000 Suzuki Intruder VS1400
Re: Need VS1400 Front pegs/turn signals/front brake master cylinder
Yeah I forgot to mention that, it's a 2001 model. I guess I could broaden the search a little....
-
- Tricycles are Cool
- Posts: 23
- Joined: Wed Apr 20, 2016 5:54 pm
- My Bike: 97 1400 + 800 Intruders
Re: Need VS1400 Front pegs/turn signals/front brake master cylinder
Send BRONX INTRUDER a message requesting parts
- BRONX INTRUDER
- Joined a 850cc Club
- Posts: 1437
- Joined: Sat Sep 27, 2014 9:00 pm
- My Bike: vs1400
- Location: Clearfield, PA
Re: Need VS1400 Front pegs/turn signals/front brake master cylinder
Thanks brother.VS1400INTRUDER wrote:Send BRONX INTRUDER a message requesting parts
Yes, i have most if not all the parts you're in need of.
Shoot me an offer while i gather them today for pics.
- mhodge
- Tricycles are Cool
- Posts: 18
- Joined: Fri May 12, 2017 6:41 pm
- My Bike: 2000 Suzuki Intruder VS1400
Re: Need VS1400 Front pegs/turn signals/front brake master cylinder
Thanks bronx, I sent you a pm
- BRONX INTRUDER
- Joined a 850cc Club
- Posts: 1437
- Joined: Sat Sep 27, 2014 9:00 pm
- My Bike: vs1400
- Location: Clearfield, PA
- mhodge
- Tricycles are Cool
- Posts: 18
- Joined: Fri May 12, 2017 6:41 pm
- My Bike: 2000 Suzuki Intruder VS1400
Re: Need VS1400 Front pegs/turn signals/front brake master cylinder
Thanks for the parts mate!
- BRONX INTRUDER
- Joined a 850cc Club
- Posts: 1437
- Joined: Sat Sep 27, 2014 9:00 pm
- My Bike: vs1400
- Location: Clearfield, PA
Re: Need VS1400 Front pegs/turn signals/front brake master cylinder
My pleasure brother! [emoji106]mhodge wrote:Thanks for the parts mate!