New Turn Light Mounts for 41mm Tubes $40.00
-
- Passed the Circle Test
- Posts: 395
- Joined: Mon Apr 04, 2016 11:13 am
- My Bike: 1988 1400cc Intruder
- Location: Los Angeles
New Turn Light Mounts for 41mm Tubes $40.00
These fit all Suzuki 1400 and S83 motorcycles aswell as all others that have 41mm tubes.
Lets you change turn lights without removing tubes.
Also lets you use many aftermarket turn lights.
Only $40.00
Photos on request.
Lets you change turn lights without removing tubes.
Also lets you use many aftermarket turn lights.
Only $40.00
Photos on request.
-
- Got My M1 License!
- Posts: 424
- Joined: Sat Oct 11, 2014 9:36 am
- My Bike: Vs800+c90
- Location: Ft Myers, Florida
Re: Turn Light Mounts for 41mm Tubes
Those are pretty, wish I had a bike with 41mm tubesPrinceMo wrote:https://losangeles.craigslist.org/wst/m ... 91690.html
-
- Passed the Circle Test
- Posts: 395
- Joined: Mon Apr 04, 2016 11:13 am
- My Bike: 1988 1400cc Intruder
- Location: Los Angeles
Re: Turn Light Mounts for 41mm Tubes
What do you ride?
-
- Got My M1 License!
- Posts: 424
- Joined: Sat Oct 11, 2014 9:36 am
- My Bike: Vs800+c90
- Location: Ft Myers, Florida
Re: Turn Light Mounts for 41mm Tubes
An '02 vs800. 39mm forksPrinceMo wrote:What do you ride?
-
- Passed the Circle Test
- Posts: 395
- Joined: Mon Apr 04, 2016 11:13 am
- My Bike: 1988 1400cc Intruder
- Location: Los Angeles
Re: Turn Light Mounts for 41mm Tubes
You can make these work by adding an incert around the 39mm tube to bring it up to 41mm.
-
- Joined a 250cc Club
- Posts: 610
- Joined: Mon May 08, 2017 8:16 pm
- My Bike: 99 Valkyrie Interstate- 05 S83
- Location: Griffithville, Arkansas
-
- Passed the Circle Test
- Posts: 395
- Joined: Mon Apr 04, 2016 11:13 am
- My Bike: 1988 1400cc Intruder
- Location: Los Angeles
Re: Turn Light Mounts for 41mm Tubes
The wires come thru the hole where the light screws in.
- Pvt_Nemesis
- Learning My Moped
- Posts: 118
- Joined: Wed May 31, 2017 3:09 pm
- My Bike: 2006 S83 Boulevard
Re: Turn Light Mounts for 41mm Tubes
But that goes straight into the tube! So where/how do the cables connect to the loom?
They are gorgeous but I cant see how the hell you can use them - I'm guessing you tap your own thread into the hole as the photo is unthreaded?
They are gorgeous but I cant see how the hell you can use them - I'm guessing you tap your own thread into the hole as the photo is unthreaded?
Ya hya chouhada!
-
- Passed the Circle Test
- Posts: 395
- Joined: Mon Apr 04, 2016 11:13 am
- My Bike: 1988 1400cc Intruder
- Location: Los Angeles
Re: Turn Light Mounts for 41mm Tubes
There is room for the wires on the bottom side of.the adaptor.
Unlike the ugly stock mounts these are 2 piece so there is no need to remove the tube to install them.
They allow you to use almost any aftermarket turn lights.
Including harley lights and L.E.D. lights too.
Unlike the ugly stock mounts these are 2 piece so there is no need to remove the tube to install them.
They allow you to use almost any aftermarket turn lights.
Including harley lights and L.E.D. lights too.
-
- Passed the Circle Test
- Posts: 395
- Joined: Mon Apr 04, 2016 11:13 am
- My Bike: 1988 1400cc Intruder
- Location: Los Angeles
Re: Turn Light Mounts for 41mm Tubes
Only 2 small wires come off the light.
Ya only need 1 or 2 mm for the wires to get out.
Ya only need 1 or 2 mm for the wires to get out.
-
- Passed the Circle Test
- Posts: 395
- Joined: Mon Apr 04, 2016 11:13 am
- My Bike: 1988 1400cc Intruder
- Location: Los Angeles
-
- Practicing Bicycling
- Posts: 37
- Joined: Tue Apr 25, 2017 9:07 pm
- My Bike: 98 Suzuki intruder vs1400
-
- Passed the Circle Test
- Posts: 395
- Joined: Mon Apr 04, 2016 11:13 am
- My Bike: 1988 1400cc Intruder
- Location: Los Angeles