Broken Final Drive Filler Cap

Look here first if you are looking for a specific bike.
If you find what you're looking for, click the link.
DannyAl
Tricycles are Cool
Posts: 4
Joined: Mon May 01, 2017 11:30 pm
My Bike: 2000 Suzuki Intruder VS 1400
Status: Offline

Broken Final Drive Filler Cap

Postby DannyAl » Sat May 20, 2017 11:38 pm

Hey everyone I have some issue here. I have broken my final gear filler cap. Now i can't ride my 2000 Suzuki Intruder 1400. Where and how can I get the same cap or is there a place where I can get a similar bolt with the same threading? I would absolutely appreciate it with any sort of info. I do not know if hardware stores have it or something. I live in So-Cal. Thank you :sad:
Lets ride.

Lechy
PULLED OVER!
Posts: 2471
Joined: Tue Dec 09, 2014 9:58 pm
My Bike: VS800 Honda Phantom 200
Status: Offline

Re: Broken Final Drive Filler Cap

Postby Lechy » Sun May 21, 2017 12:10 am

I think it is a 3/4" pipe plug NPP thread with a sealing face. Should be available most pipefitting stores.
[emoji41]
Grow old disgracefully young man.

navigator
Joined a 450cc Club
Posts: 862
Joined: Thu Dec 29, 2016 12:33 pm
My Bike: VS800
Status: Online

Re: Broken Final Drive Filler Cap

Postby navigator » Sun May 21, 2017 9:04 am

part number 09259-30007
check your local dealer.

http://www.partzilla.com/parts/detail/s ... 30007.html

User avatar
Fred
PULLED OVER!
Posts: 2499
Joined: Tue Dec 02, 2014 12:08 am
My Bike: VS 1400. Royal Enfield
Status: Offline

Re: Broken Final Drive Filler Cap

Postby Fred » Tue Sep 05, 2017 10:01 pm

Lechy wrote:I think it is a 3/4" pipe plug NPP thread with a sealing face. Should be available most pipefitting stores.
[emoji41]


Noooo pipe thread do not have a sealing face. Thats the whole point of pipe thread, taper thread with PTFE

Fuck this up and you are looking at a new pumpkin case.

Why do people tighten things up that dont need to be --its just an oil plug --its not holding the engine in.

How good are you with an angle grinder. I would make one from hard wood and cut a thread with a thin disc cutter.

!!!!!!!!!!! I did say you will have to be good. I mean real good. or buy a new one.

hillsy
Joined a 250cc Club
Posts: 557
Joined: Wed Sep 17, 2014 12:43 am
Status: Offline

Re: Broken Final Drive Filler Cap

Postby hillsy » Tue Sep 05, 2017 10:14 pm

Rubber stopper and a couple of loops of duct tape. Call it good.

Lechy
PULLED OVER!
Posts: 2471
Joined: Tue Dec 09, 2014 9:58 pm
My Bike: VS800 Honda Phantom 200
Status: Offline

Re: Broken Final Drive Filler Cap

Postby Lechy » Tue Sep 05, 2017 10:24 pm

NPP National Pipe thread PARALLEL.

NPT National pipe thread taper.

[emoji41]
Grow old disgracefully young man.

User avatar
Fred
PULLED OVER!
Posts: 2499
Joined: Tue Dec 02, 2014 12:08 am
My Bike: VS 1400. Royal Enfield
Status: Offline

Re: Broken Final Drive Filler Cap

Postby Fred » Tue Sep 05, 2017 11:22 pm

hillsy wrote:Rubber stopper and a couple of loops of duct tape. Call it good.


Yup why not, it does'nt hold pressure the pumpkin is vented else where.


:ahha:
Champagne cork. leave the shiny silver paper on and it will match in.

Not many champagne corks in Lechys house.

Lechy
PULLED OVER!
Posts: 2471
Joined: Tue Dec 09, 2014 9:58 pm
My Bike: VS800 Honda Phantom 200
Status: Offline

Re: Broken Final Drive Filler Cap

Postby Lechy » Wed Sep 06, 2017 12:09 am

Drinking champagne is like riding a Harley.
Both are over priced over rated and under powered.

[emoji41]
Grow old disgracefully young man.

User avatar
Fred
PULLED OVER!
Posts: 2499
Joined: Tue Dec 02, 2014 12:08 am
My Bike: VS 1400. Royal Enfield
Status: Offline

Re: Broken Final Drive Filler Cap

Postby Fred » Wed Sep 06, 2017 2:18 am

Drinking Champagne is like a harley. Its for people with small penis, more money than sense and gets right up your nose.


Return to “Bike Index”

Who is online

Users browsing this forum: No registered users and 1 guest