Use vinegar.
It does the job..it is cheap and it will not screw up your paint or kill the dog.
I filled mine about 1/3 FULL because the bottom is the worst.
Then I added 1/3 lb of BBs but nuts and bolts work too to break up the big deposits.
I let is sit for a day or so shaking it every 5 or 6 hours.
Then I dumped it out but saved the vinegar because you can use it as weed killer.
I then washed it out with clean water and let it dry.
This may be enough depending on how bad the rust is.
Mine was bad so I filled the tank with new vinager and let is sit another day or two.
Then dump rinse and let dry.
It looks good as new.
How to Clean a Rusty Gas Tank.
-
- Passed the Circle Test
- Posts: 395
- Joined: Mon Apr 04, 2016 11:13 am
- My Bike: 1988 1400cc Intruder
- Location: Los Angeles
-
- Tricycles are Cool
- Posts: 10
- Joined: Thu Jul 20, 2017 2:08 am
- My Bike: VS800gl
Re: How to Clean a Rusty Gas Tank.
Just used this method with more vinegar and no BB's to clean up my step dad's tank. Seemed to work really well for me as well. Used distilled water to rinse out the vinegar. There was a surprising amount of crap that came out.
-
- Back on the Road
- Posts: 3650
- Joined: Sun Jan 10, 2016 6:13 am
- My Bike: Kugelblitz-Kriegshammer 2200
Re: How to Clean a Rusty Gas Tank.
I use the vinegar but instead of bolts I get a few feet of that real light cheap twisted wire chain and throw it in there. It's less than a buck a foot at the hardware store and really works good.
-
- Joined a 650cc Club
- Posts: 1027
- Joined: Sun Feb 21, 2016 1:28 am
- My Bike: vs1400
Re: How to Clean a Rusty Gas Tank.
The recommendation is to use distilled white vinegar rather than plain vinegar. It is a more purified form of vinegar in addition to being somewhat stronger and therefore more effective.
![Wink :wink:](./images/smilies/icon_e_wink.gif)
![Wink :wink:](./images/smilies/icon_e_wink.gif)
-
- Joined a 1100cc Club
- Posts: 5495
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: How to Clean a Rusty Gas Tank.
I'd say I agree with a length of chain...when you are done, grab the chain and the tank is empty.
With bolts and bb's you have to fish each and every one out. JMO.
With bolts and bb's you have to fish each and every one out. JMO.
-
- Passed the Circle Test
- Posts: 395
- Joined: Mon Apr 04, 2016 11:13 am
- My Bike: 1988 1400cc Intruder
- Location: Los Angeles
Re: How to Clean a Rusty Gas Tank.
No fishing.
You just pour them out with the vinegar and rinse.
You just pour them out with the vinegar and rinse.
- Designer
- Joined a 1200cc Club
- Posts: 17397
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: How to Clean a Rusty Gas Tank.
You cannot easily get them all out by pouring because on the 1400 tank there is a Ullage Tube at the Gas Cap.PrinceMo wrote:No fishing. You just pour them out with the vinegar and rinse.
Using a small chain works the best...one with sharp edges on each link is preferred,....like the Replacement Sash Balance Chain used for Sash Weights for older Double-hung Windows.