Hi was wanting to know if someone could tell me on the front carburetor's bowl , there is a casting mark to check your fuel level using clear rubber hose, does anyone know if that long casting mark is the ideal fuel height or does it need to be 17mm above that casting mark to me correct..?
My manual is unclear and the picture is so awful you cant make out to what the technician is even pointing to. Please someone help I gotta get this back together. thanks in advance..!!
1988 Suzuki Vs Intruder 750, can someone help please..?
-
- Tricycles are Cool
- Posts: 1
- Joined: Fri Jan 27, 2017 11:00 am
- My Bike: 88 Suzuki Vs 750 Intruder
-
- Joined a 1000cc Club
- Posts: 3968
- Joined: Tue Dec 09, 2014 9:58 pm
- My Bike: VS800 Honda Phantom 200
Re: 1988 Suzuki Vs Intruder 750, can someone help please..?
17mm BELOW the casting mark with the carb in place and the bike upright. [emoji41]
Grow old disgracefully young man.
-
- Joined a 1000cc Club
- Posts: 3968
- Joined: Tue Dec 09, 2014 9:58 pm
- My Bike: VS800 Honda Phantom 200
Re: 1988 Suzuki Vs Intruder 750, can someone help please..?
best I have it figured, if you are setting the float on the bench, the reference line must be horizontal.
[emoji41]
Screw Photobucket.
[emoji41]
[emoji41]
Screw Photobucket.
[emoji41]
Grow old disgracefully young man.
-
- Learning My Moped
- Posts: 103
- Joined: Wed Jun 21, 2017 8:52 am
- My Bike: 2008 Suzuki s83
- Location: Gods country..the South
Re: 1988 Suzuki Vs Intruder 750, can someone help please..?
Ta Da, Ta Da, Ta Da... Lechy to the rescue.... AGAIN.. Guess Lechy beat 98VS, Madcow and our other guru's to the punch.. Thank you sir... for being a mentor.
Dave
Dave
-
- Back on the Road
- Posts: 3565
- Joined: Tue Dec 09, 2014 5:07 pm
- My Bike: 650Vstrom
Re: 1988 Suzuki Vs Intruder 750, can someone help please..?
Lechy is so good at that kind of stuff and ways to do things better and lots of times less work [emoji106]