Polishing Fork Tube Lowers

The information presented here applies to most all motorcycles in general.
Post Reply
User avatar
Night_Wolf
Scooter Enthusiast
Posts: 280
Joined: Mon Jan 05, 2015 7:03 pm
My Bike: 2006 1400 Intruder
Location: Calgary Alberta
Contact:

Polishing Fork Tube Lowers

Post by Night_Wolf »

Polishing Fork Tube Lowers
Eddie D.



I've had many requests for a write-up on how I did my fork tube lowers so here it is...

A)Jacked up the bike on motorcycle jack (I have the Sam's Club model by the way).

B)Removed front wheel, brake caliper, front fender.

C)Put axle back in (this prevents tubes from spinning while you're working them).

D)Tied back the speedometer hub and brake caliper to frame so they'd stay out of the way.

E)Covered the bike with a sheet and various towels, the dust and polish will fly when you get into doing this!

The Pictures @ rest of the information can be found @ Night_Wolf's Lair/Wrenching & Tips
Type @ Ya'll Later
Night_Wolf


Intruder Alert Canada/Night_Wolf's Lair

Alberta Adventure Riders


2006 VS1400 Image 2020 V85TT Image

Post Reply