Vertical Plate Holder(s)

The information presented here applies to most all motorcycles in general.
Post Reply
User avatar
Night_Wolf
Scooter Enthusiast
Posts: 280
Joined: Mon Jan 05, 2015 7:03 pm
My Bike: 2006 1400 Intruder
Location: Calgary Alberta
Contact:

Vertical Plate Holder(s)

Post by Night_Wolf »

Vertical Plate Holder(s)
2 Versions


Pic #1 Just a close up from the rear

Pic #2 Close up from the side

Pic #3 Pie shaped or semi triangle, stainless steel,
5 1/2 inches long by 4 inches wide with
1 1/2 inches at 90% bend at what would be the pie crust.
Leaves 4 inches showing, with holes drilled for license bracket.
For license plate lite installation, leave top side about
1 or 1 1/2 inches longer. Auto zone has a light that is a perfect
fit, reasonably priced.
One hole drilled at narrow part. Leave some shoulder for
strength to attach holder to bottom shock mount bolt.
I took pair of visegrips & turned down the edges all way
around til I got to the bend, at the pie crust for added
strength & it looks better.

Pictures & the rest of the info can be found @ Night_Wolf's Lair/Wrenching & Tips
Type @ Ya'll Later
Night_Wolf


Intruder Alert Canada/Night_Wolf's Lair

Alberta Adventure Riders


2006 VS1400 Image 2020 V85TT Image

Post Reply