Page 1 of 1

Need VS1400 Front pegs/turn signals/front brake master cylinder

Posted: Tue Jan 09, 2018 3:38 pm
by mhodge
After my low side, I need some parts...
Tried to bend back my bent footpeg but the cheap potmetal snapped in half.

I need the right front foot peg, or the whole footpeg assembly.
I'd like to get the front right and left turn signals if I can find them for cheapish in decent condition
Also I could really use a front brake master cylinder.

I could get by without the turn signals, and I might be able to grind down the scratched up master cylinder until it works again, but I just don't want to mismatch the pegs and its killing me not riding my bike!

If anyone has the stuff, I'd happily pay market price + shipping.

Re: Need VS1400 Front pegs/turn signals/front brake master cylinder

Posted: Wed Jan 10, 2018 3:43 am
by Swcoinguy
I believe the pegs and M/C remained unchanged through the production life of your bike but the signals did change in '04 if I'm not mistaken. Is your bike an '04 or '03 and older?
I didn't have the parts your looking for but the info might help with getting the correct signals. The mounting is the same but in '04 Suzuki started using the bullet style housings. The earlier bikes used the flat style housings with two screws holding the lens on.

Re: Need VS1400 Front pegs/turn signals/front brake master cylinder

Posted: Wed Jan 10, 2018 3:10 pm
by mhodge
Yeah I forgot to mention that, it's a 2001 model. I guess I could broaden the search a little....

Re: Need VS1400 Front pegs/turn signals/front brake master cylinder

Posted: Wed Jan 10, 2018 3:46 pm
by VS1400INTRUDER
Send BRONX INTRUDER a message requesting parts
:cheers:

Re: Need VS1400 Front pegs/turn signals/front brake master cylinder

Posted: Thu Jan 11, 2018 6:51 am
by BRONX INTRUDER
VS1400INTRUDER wrote:Send BRONX INTRUDER a message requesting parts
:cheers:
Thanks brother. :cheers:
Yes, i have most if not all the parts you're in need of.
Shoot me an offer while i gather them today for pics.

Re: Need VS1400 Front pegs/turn signals/front brake master cylinder

Posted: Thu Jan 11, 2018 7:28 am
by mhodge
Thanks bronx, I sent you a pm

Re: Need VS1400 Front pegs/turn signals/front brake master cylinder

Posted: Thu Jan 18, 2018 5:58 pm
by BRONX INTRUDER
:cheers:

Re: Need VS1400 Front pegs/turn signals/front brake master cylinder

Posted: Thu Jan 18, 2018 6:22 pm
by mhodge
Thanks for the parts mate!

Re: Need VS1400 Front pegs/turn signals/front brake master cylinder

Posted: Sat Jan 20, 2018 5:57 am
by BRONX INTRUDER
mhodge wrote:Thanks for the parts mate!
My pleasure brother! [emoji106]