Need VS1400 Front pegs/turn signals/front brake master cylinder

Buy, sell or trade. This is the place for it.
Be aware that transactions here are in no way the responsibility of this forum.
Post Reply
User avatar
mhodge
Tricycles are Cool
Posts: 18
Joined: Fri May 12, 2017 6:41 pm
My Bike: 2000 Suzuki Intruder VS1400

Need VS1400 Front pegs/turn signals/front brake master cylinder

Post by mhodge »

After my low side, I need some parts...
Tried to bend back my bent footpeg but the cheap potmetal snapped in half.

I need the right front foot peg, or the whole footpeg assembly.
I'd like to get the front right and left turn signals if I can find them for cheapish in decent condition
Also I could really use a front brake master cylinder.

I could get by without the turn signals, and I might be able to grind down the scratched up master cylinder until it works again, but I just don't want to mismatch the pegs and its killing me not riding my bike!

If anyone has the stuff, I'd happily pay market price + shipping.

Swcoinguy
Got My M1 License!
Posts: 424
Joined: Sat Oct 11, 2014 9:36 am
My Bike: Vs800+c90
Location: Ft Myers, Florida

Re: Need VS1400 Front pegs/turn signals/front brake master cylinder

Post by Swcoinguy »

I believe the pegs and M/C remained unchanged through the production life of your bike but the signals did change in '04 if I'm not mistaken. Is your bike an '04 or '03 and older?
I didn't have the parts your looking for but the info might help with getting the correct signals. The mounting is the same but in '04 Suzuki started using the bullet style housings. The earlier bikes used the flat style housings with two screws holding the lens on.

User avatar
mhodge
Tricycles are Cool
Posts: 18
Joined: Fri May 12, 2017 6:41 pm
My Bike: 2000 Suzuki Intruder VS1400

Re: Need VS1400 Front pegs/turn signals/front brake master cylinder

Post by mhodge »

Yeah I forgot to mention that, it's a 2001 model. I guess I could broaden the search a little....

VS1400INTRUDER
Tricycles are Cool
Posts: 23
Joined: Wed Apr 20, 2016 5:54 pm
My Bike: 97 1400 + 800 Intruders

Re: Need VS1400 Front pegs/turn signals/front brake master cylinder

Post by VS1400INTRUDER »

Send BRONX INTRUDER a message requesting parts
:cheers:

User avatar
BRONX INTRUDER
Joined a 850cc Club
Posts: 1437
Joined: Sat Sep 27, 2014 9:00 pm
My Bike: vs1400
Location: Clearfield, PA

Re: Need VS1400 Front pegs/turn signals/front brake master cylinder

Post by BRONX INTRUDER »

VS1400INTRUDER wrote:Send BRONX INTRUDER a message requesting parts
:cheers:
Thanks brother. :cheers:
Yes, i have most if not all the parts you're in need of.
Shoot me an offer while i gather them today for pics.

User avatar
mhodge
Tricycles are Cool
Posts: 18
Joined: Fri May 12, 2017 6:41 pm
My Bike: 2000 Suzuki Intruder VS1400

Re: Need VS1400 Front pegs/turn signals/front brake master cylinder

Post by mhodge »

Thanks bronx, I sent you a pm

User avatar
BRONX INTRUDER
Joined a 850cc Club
Posts: 1437
Joined: Sat Sep 27, 2014 9:00 pm
My Bike: vs1400
Location: Clearfield, PA

Re: Need VS1400 Front pegs/turn signals/front brake master cylinder

Post by BRONX INTRUDER »

:cheers:

User avatar
mhodge
Tricycles are Cool
Posts: 18
Joined: Fri May 12, 2017 6:41 pm
My Bike: 2000 Suzuki Intruder VS1400

Re: Need VS1400 Front pegs/turn signals/front brake master cylinder

Post by mhodge »

Thanks for the parts mate!

User avatar
BRONX INTRUDER
Joined a 850cc Club
Posts: 1437
Joined: Sat Sep 27, 2014 9:00 pm
My Bike: vs1400
Location: Clearfield, PA

Re: Need VS1400 Front pegs/turn signals/front brake master cylinder

Post by BRONX INTRUDER »

mhodge wrote:Thanks for the parts mate!
My pleasure brother! [emoji106]

Post Reply