Intruders-Alert

These fit all Suzuki 1400 and S83 motorcycles aswell as all others that have 41mm tubes.

Lets you change turn lights without removing tubes.

Also lets you use many aftermarket turn lights.

Only $40.00
Photos on request.

PrinceMo wrote:https://losangeles.craigslist.org/wst/m ... 91690.html

Those are pretty, wish I had a bike with 41mm tubes

What do you ride?

PrinceMo wrote:What do you ride?

An '02 vs800. 39mm forks

You can make these work by adding an incert around the 39mm tube to bring it up to 41mm.

Where does the wire exit?

The wires come thru the hole where the light screws in.

But that goes straight into the tube! So where/how do the cables connect to the loom?
They are gorgeous but I cant see how the hell you can use them - I'm guessing you tap your own thread into the hole as the photo is unthreaded?

There is room for the wires on the bottom side of.the adaptor.
Unlike the ugly stock mounts these are 2 piece so there is no need to remove the tube to install them.

They allow you to use almost any aftermarket turn lights.
Including harley lights and L.E.D. lights too.

Only 2 small wires come off the light.
Ya only need 1 or 2 mm for the wires to get out.

Bump

pics?

These are brand new show chrome.

https://losangeles.craigslist.org/wst/m ... 60513.html