WTB front/back rims, drum brake, front brake rotor.

[Acton67]

Looking for parts in decent shape. These parts on my bike are corroded and/or rusty. Figure now is a good time to upgrade if I can. Thanks.

[BRONX INTRUDER]

Location?

[Acton67]

Hudson Valley NY

[BRONX INTRUDER]

Ok. I'll try to grab some pics for ya tomorrow.

[BRONX INTRUDER]

Rear wheel


Rear snowflake; just in case


Fender struts

Drum brake - I can see how much a little polish cleans it up; if you'd like.


Rotors, front 21" rim has a little lip

[Acton67]

Definitely interested in the fender struts, how much to ship to 12589? The drum brake looks to be in the same condition as my current one. I'd be interested to see what it looks like after some polish though. Getting a matching set of snowflake rims would definitely be the dream, not sure where I'd find a matching front rim and I know they go for a pretty penny. Id be interested in the stock rims too, sounds like the front rim won't work for me though. I'd be interested in the back potentially. Also interested in the brake rotors, how much for the rotor and the struts?

[navigator]

Your brake assembly is clear coated aluminum, same as the fork lowers.
The problem is when the finish is chipped it will corrode underneath.
You can use aircraft paint stripper to remove the clearcoat. then sand it with 150 emery followed by 400 wet sanding, then use a good quality metal polish and it will clean up nicely.

[BRONX INTRUDER]

Your brake assembly is clear coated aluminum, same as the fork lowers.
The problem is when the finish is chipped it will corrode underneath.
You can use aircraft paint stripper to remove the clearcoat. then sand it with 150 emery followed by 400 wet sanding, then use a good quality metal polish and it will clean up nicely.

Thanks for the tip brother.

[dwd58]

Bronx, is there any rust at all on the struts? How much to ship to 41256?

[BRONX INTRUDER]

Bronx, is there any rust at all on the struts? How much to ship to 41256?

You need vs800 or vs1400 fender struts?

[BRONX INTRUDER]

Definitely interested in the fender struts, how much to ship to 12589? The drum brake looks to be in the same condition as my current one. I'd be interested to see what it looks like after some polish though. Getting a matching set of snowflake rims would definitely be the dream, not sure where I'd find a matching front rim and I know they go for a pretty penny. Id be interested in the stock rims too, sounds like the front rim won't work for me though. I'd be interested in the back potentially. Also interested in the brake rotors, how much for the rotor and the struts?

I'll box and get a ship estimate for ya soon.

[Acton67]

Definitely interested in the fender struts, how much to ship to 12589? The drum brake looks to be in the same condition as my current one. I'd be interested to see what it looks like after some polish though. Getting a matching set of snowflake rims would definitely be the dream, not sure where I'd find a matching front rim and I know they go for a pretty penny. Id be interested in the stock rims too, sounds like the front rim won't work for me though. I'd be interested in the back potentially. Also interested in the brake rotors, how much for the rotor and the struts?

I'll box and get a ship estimate for ya soon.

Awesome.

[dwd58]

vs 1400 fender struts

[BRONX INTRUDER]

vs 1400 fender struts

I'll check for ya.. Might have.