Morning intruders. Hope you and your loved ones are well. So here I come to bother with another question. I finally had the bike rollin' well. No starting issues, no missing light function, RPM's was easily fixed by mechanic. All was great. Then. My cowardly @hole of a landlord, knocked over the bike. On purpose I'm sure. Bike went down on its left side and broke off the foot peg and bent the clutch lever. For a few days it was functioning ok I guess. Then little by little it wouldn't start. I kept trying and trying and it finally did several times. But now, it does not. It'll get like a small jolt but not enough to start. The battery is fine, the lights turn on fully and when I turn on the ignition, I can hear the click under me. But no start. Some of the last times it did start, I wiggled the cables that are attached to the handles, and it worked. But not anymore. I'm assuming that when it got knocked over and the lever bent, it put something out of whack with the whole starting process. Any ideas please ? I'm assuming removing the tank is a start to get to the cables. But what's the minimum steps I can try to eliminate possibilities? I don't want to risk messing it up more by moving unnecessary parts. Thanks in advance for any feedback.
PS.. plenty of gas in the tank.
'96 VS800GL Ignition clicks, lights on, NOT STARTING!!
-
- Practicing Bicycling
- Posts: 26
- Joined: Sat May 16, 2020 10:39 am
- My Bike: 1997 Suzuki Intruder vs800gl
-
- Joined a 1100cc Club
- Posts: 5500
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: '96 VS800GL Ignition clicks, lights on, NOT STARTING!!
First check:
under the clutch lever are 2 wires, unplug them and jumper them together with a piece of wire, paper clip, fuse...whatever.
This is the clutch safety switch, make sure you are in neutral.
Second check:
Make sure the kickstand switch is working....also in neutral.
Then tell us how you made out.
under the clutch lever are 2 wires, unplug them and jumper them together with a piece of wire, paper clip, fuse...whatever.
This is the clutch safety switch, make sure you are in neutral.
Second check:
Make sure the kickstand switch is working....also in neutral.
Then tell us how you made out.
- Suzuki Johnny
- Joined a 1200cc Club
- Posts: 33084
- Joined: Wed Dec 10, 2014 5:25 am
- My Bike: 2020 Tri Glide Ultra Harley
- Location: GODS COUNTRY
Re: '96 VS800GL Ignition clicks, lights on, NOT STARTING!!
Welcome to the Board
Ride Safe and Post Often
Good advice always check your kill switches first
Ride Safe and Post Often
Good advice always check your kill switches first
duc, sequere, aut de via decede
"frapper fort, frapper vite, frappée souvent-- Adm William "Bull" Halsey
“We’re not going to just shoot the sons-of-bitches, we’re going to rip out their living Goddamned guts and use them to grease the treads of our tanks.”--Gen George Patton
"Our Liberty is insured by four "Boxes", the Ballot box, the Jury box, the Soap box and the Cartridge box"
"frapper fort, frapper vite, frappée souvent-- Adm William "Bull" Halsey
“We’re not going to just shoot the sons-of-bitches, we’re going to rip out their living Goddamned guts and use them to grease the treads of our tanks.”--Gen George Patton
"Our Liberty is insured by four "Boxes", the Ballot box, the Jury box, the Soap box and the Cartridge box"