Intruder 900

Post Reply
User avatar
Blaine
Passed the Circle Test
Posts: 349
Joined: Mon Jan 11, 2016 1:03 pm
My Bike: 05 S83 07 M50

Intruder 900

Post by Blaine »

If at first you succeed,don't be surprised.

Image

User avatar
WintrSol
Joined a 450cc Club
Posts: 857
Joined: Fri Feb 26, 2016 2:02 pm
My Bike: CB450 GL1500CT
Location: Near St. Louis, MO

Re: Intruder 900

Post by WintrSol »

So, what's the gist for those of us that can't open the page?
Florissant, MO
CB450K3, GL1500CTValkyrie

User avatar
Blaine
Passed the Circle Test
Posts: 349
Joined: Mon Jan 11, 2016 1:03 pm
My Bike: 05 S83 07 M50

Re: Intruder 900

Post by Blaine »

WintrSol wrote:So, what's the gist for those of us that can't open the page?
Page should open automatically when you click on the link...It's basically a 800 thats rebuilt into a 900 with tons of power.Try this link..
http://www.msn.com/en-us/autos/motorcyc ... ss-BBEj2yT
If at first you succeed,don't be surprised.

Image

Lechy
Joined a 1000cc Club
Posts: 3955
Joined: Tue Dec 09, 2014 9:58 pm
My Bike: VS800 Honda Phantom 200

Re: Intruder 900

Post by Lechy »

Some dude took an 800, bored it out from 83mm to 85 mm, fitted Yammi 900 pistons with reworked crowns upping compression, reworked the valves and ported the heads. No other real specs just to say that it's a real fast little bitch.
[emoji41]
Grow old disgracefully young man.

Swcoinguy
Got My M1 License!
Posts: 424
Joined: Sat Oct 11, 2014 9:36 am
My Bike: Vs800+c90
Location: Ft Myers, Florida

Re: Intruder 900

Post by Swcoinguy »

Lechy wrote:Some dude took an 800, bored it out from 83mm to 85 mm, fitted Yammi 900 pistons with reworked crowns upping compression, reworked the valves and ported the heads. No other real specs just to say that it's a real fast little bitch.
[emoji41]
He used Kawasaki 750 pistons, custom cut cams, and pod filters. The new jet sizes are ridiculous too. I bet it does run like a raped ape. Did you see the wheelie pic?

Lechy
Joined a 1000cc Club
Posts: 3955
Joined: Tue Dec 09, 2014 9:58 pm
My Bike: VS800 Honda Phantom 200

Re: Intruder 900

Post by Lechy »

Oops on the 900. I read it about a week ago.
he has taken 1mm overall off the sleeve and raised the compression. I would wonder if the sleeve could accommodate this under hard riding conditions.
[emoji41]
Grow old disgracefully young man.

User avatar
WintrSol
Joined a 450cc Club
Posts: 857
Joined: Fri Feb 26, 2016 2:02 pm
My Bike: CB450 GL1500CT
Location: Near St. Louis, MO

Re: Intruder 900

Post by WintrSol »

Blaine wrote:
WintrSol wrote:So, what's the gist for those of us that can't open the page?
Page should open automatically when you click on the link...
Nope - have to have a Failbook account and log in. Some of us don't want to be another commodity to be sold by an unscrupulous corporation.

As far as the 900 goes, cool, but I thought my 800 was impressive enough, without shortening its life that way.
Florissant, MO
CB450K3, GL1500CTValkyrie

User avatar
Blaine
Passed the Circle Test
Posts: 349
Joined: Mon Jan 11, 2016 1:03 pm
My Bike: 05 S83 07 M50

Re: Intruder 900

Post by Blaine »

WintrSol wrote:
Blaine wrote:
WintrSol wrote:So, what's the gist for those of us that can't open the page?
Page should open automatically when you click on the link...
Nope - have to have a Failbook account and log in. Some of us don't want to be another commodity to be sold by an unscrupulous corporation.

As far as the 900 goes, cool, but I thought my 800 was impressive enough, without shortening its life that way.
Did you try the second link I provided.?
If at first you succeed,don't be surprised.

Image

User avatar
WintrSol
Joined a 450cc Club
Posts: 857
Joined: Fri Feb 26, 2016 2:02 pm
My Bike: CB450 GL1500CT
Location: Near St. Louis, MO

Re: Intruder 900

Post by WintrSol »

Blaine wrote: Did you try the second link I provided.?
That one works, since it's MSN. Same article on a different site?
Florissant, MO
CB450K3, GL1500CTValkyrie

Post Reply