Clutch release cylinder
-
- Tricycles are Cool
- Posts: 16
- Joined: Sun Jul 10, 2016 2:09 pm
- My Bike: 07 Suzuki S50 Honda VTX 1300
Clutch release cylinder
What is behind the clutch release cylinder? Fluid or dry?..... Thanks.
- WintrSol
- Joined a 450cc Club
- Posts: 857
- Joined: Fri Feb 26, 2016 2:02 pm
- My Bike: CB450 GL1500CT
- Location: Near St. Louis, MO
Re: Clutch release cylinder
I assume you mean the slave cylinder? Look at this drawing: http://www.partsoutlaw.com/oemparts/a/s ... 615/clutch
Fluid presses against the cup #25 and the un-numbered part left of it, which press against the throwout push rod #21, which moves into the crankcase through the oil seal #22. So, oil behind the oil seal, but air between it, and around, the slave cylinder. The slave hides behind the cover #23 in this drawing: http://www.partsoutlaw.com/oemparts/a/s ... case-cover. The area under that cover should be dry.
Fluid presses against the cup #25 and the un-numbered part left of it, which press against the throwout push rod #21, which moves into the crankcase through the oil seal #22. So, oil behind the oil seal, but air between it, and around, the slave cylinder. The slave hides behind the cover #23 in this drawing: http://www.partsoutlaw.com/oemparts/a/s ... case-cover. The area under that cover should be dry.
Florissant, MO
CB450K3, GL1500CTValkyrie
CB450K3, GL1500CTValkyrie
-
- Tricycles are Cool
- Posts: 16
- Joined: Sun Jul 10, 2016 2:09 pm
- My Bike: 07 Suzuki S50 Honda VTX 1300
Re: Clutch release cylinder
Thank you!!!