Clutch release cylinder

Post Reply
MarineScott
Tricycles are Cool
Posts: 16
Joined: Sun Jul 10, 2016 2:09 pm
My Bike: 07 Suzuki S50 Honda VTX 1300

Clutch release cylinder

Post by MarineScott »

What is behind the clutch release cylinder? Fluid or dry?..... Thanks.

User avatar
WintrSol
Joined a 450cc Club
Posts: 857
Joined: Fri Feb 26, 2016 2:02 pm
My Bike: CB450 GL1500CT
Location: Near St. Louis, MO

Re: Clutch release cylinder

Post by WintrSol »

I assume you mean the slave cylinder? Look at this drawing: http://www.partsoutlaw.com/oemparts/a/s ... 615/clutch
Fluid presses against the cup #25 and the un-numbered part left of it, which press against the throwout push rod #21, which moves into the crankcase through the oil seal #22. So, oil behind the oil seal, but air between it, and around, the slave cylinder. The slave hides behind the cover #23 in this drawing: http://www.partsoutlaw.com/oemparts/a/s ... case-cover. The area under that cover should be dry.
Florissant, MO
CB450K3, GL1500CTValkyrie

MarineScott
Tricycles are Cool
Posts: 16
Joined: Sun Jul 10, 2016 2:09 pm
My Bike: 07 Suzuki S50 Honda VTX 1300

Re: Clutch release cylinder

Post by MarineScott »

Thank you!!!

Post Reply