achterwiel
-
- Tricycles are Cool
- Posts: 13
- Joined: Sun Jul 10, 2022 2:35 pm
- My Bike: vs700 1986
- Location: belgium
achterwiel
ik heb een probleem met mijn achterwiel dat staat niet in het midden lings tegen cardanas 1mm rechts 4 cm
is er een oplossing
I have a problem with my rear wheel that is not centered against the cardan shaft 1mm on the right by 4 cm
is there a solution?
is er een oplossing
I have a problem with my rear wheel that is not centered against the cardan shaft 1mm on the right by 4 cm
is there a solution?
-
- Joined a 1100cc Club
- Posts: 5511
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: achterwiel
There is nothing wrong with your spacing.
The tire/wheel is not centered within the swing arm.
Those measurements are normal.
Er is niets mis met je afstand.
De band/het wiel is niet gecentreerd binnen de zwenkarm.
Die metingen zijn normaal.
The tire/wheel is not centered within the swing arm.
Those measurements are normal.
Er is niets mis met je afstand.
De band/het wiel is niet gecentreerd binnen de zwenkarm.
Die metingen zijn normaal.
-
- Tricycles are Cool
- Posts: 13
- Joined: Sun Jul 10, 2022 2:35 pm
- My Bike: vs700 1986
- Location: belgium
Re: achterwiel
ok thx
I was afraid. tire is showing signs of wear from hitting the gimbal
tire is a 140/90/15
I was afraid. tire is showing signs of wear from hitting the gimbal
tire is a 140/90/15
-
- Joined a 1100cc Club
- Posts: 5511
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: achterwiel
The tire is very close to the driveshaft housing.
You can go as wide as 150/90-15 without problems.
Be sure the tire is properly inflated....I like 38 psi.
You can go as wide as 150/90-15 without problems.
Be sure the tire is properly inflated....I like 38 psi.
- Herb
- Joined a 1200cc Club
- Posts: 19368
- Joined: Sun Oct 26, 2014 9:28 pm
- My Bike: 1999 1400 intruder
Re: achterwiel
Is there any chance that the rear wheel is not properly installed causing it to be offset?
https://www.suzukipartshouse.com/oempar ... lefh-gleph
https://www.suzukipartshouse.com/oempar ... lefh-gleph
I can't seem to win the lottery. I think I have used up all of my good luck riding motorcycles.
-
- Joined a 1100cc Club
- Posts: 5511
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: achterwiel
It is possible if part #25 on the fiche is missing.Herb wrote: ↑Mon Sep 25, 2023 10:48 pmIs there any chance that the rear wheel is not properly installed causing it to be offset?
https://www.suzukipartshouse.com/oempar ... lefh-gleph
part # 64772-34201
- Herb
- Joined a 1200cc Club
- Posts: 19368
- Joined: Sun Oct 26, 2014 9:28 pm
- My Bike: 1999 1400 intruder
Re: achterwiel
I know that the wheel is offset to the left but the picture shows it a lot closer than it should be.
I can't seem to win the lottery. I think I have used up all of my good luck riding motorcycles.
-
- Tricycles are Cool
- Posts: 13
- Joined: Sun Jul 10, 2022 2:35 pm
- My Bike: vs700 1986
- Location: belgium
Re: achterwiel
no it is inside
-
- Tricycles are Cool
- Posts: 13
- Joined: Sun Jul 10, 2022 2:35 pm
- My Bike: vs700 1986
- Location: belgium
Re: achterwiel
any idea how long the spacer is ? mine is 7.4 cm or 2.91338583 inches
-
- Tricycles are Cool
- Posts: 13
- Joined: Sun Jul 10, 2022 2:35 pm
- My Bike: vs700 1986
- Location: belgium
Re: achterwiel
problem solved i put 2 rings between the spacer and the weel now i have 3mm or 1/8 inch
- Herb
- Joined a 1200cc Club
- Posts: 19368
- Joined: Sun Oct 26, 2014 9:28 pm
- My Bike: 1999 1400 intruder
Re: achterwiel
Glad to hear you fixed the problem.
I am wondering how this could have happened.
Seems like there has to be something else done wrong in the past.
The next time you have the back wheel off I would use the parts fiche and verify all of the parts in it. I wonder if it could be something missing on the drive portion.
I can't seem to win the lottery. I think I have used up all of my good luck riding motorcycles.
-
- Tricycles are Cool
- Posts: 13
- Joined: Sun Jul 10, 2022 2:35 pm
- My Bike: vs700 1986
- Location: belgium
Re: achterwiel
I think the tire is the problem, it is a Metzler 140/90/15
-
- Joined a 1100cc Club
- Posts: 5511
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800