Side license plate mount

[Miks]

Hi mates!

I want to put side license plate mount on my VS750. Those who already have it installed - where do you fix it? On the axle or shock bolt?

Might produce one myself or buy if good offer comes around.
Pictures or drawings welcome!


Thanks,

[sgtcall]

Something like this?

https://customizedchoppers.com/products ... 0-intruder

[Designer]

Making your own isn't all that hard.


I made my own;

[Miks]

Found a drawing where it shows attachment so that it doesn't change position while riding. Probably will try to make one by myself.

[Designer]

Found a drawing where it shows attachment so that it doesn't change position while riding. Probably will try to make one by myself.

I see they use the Axle Recess in the Final Drive Housing as a secondary mounting point. That should work,...provided the Main Mounting point using the Lower Shock Mounting Stud is really solid.

The Length/weight of their Plate Mounting Arm coupled with the weight of the Plate/Frame itself causes me concerns.

Also, it being stuck way far away from the Final Drive can be a "trip hazard" and cause you problems banging into your legs.

That's why I made my Mounting so far inwards ( actually over the Final Drive)

Just some Design thoughts for you to consider before Fabrication.

[Henchman]

https://photos.app.goo.gl/We8G7eYgxLzyrTxV7


Here is mine. It's a ebay special with attached tail light mounted to the axle. I had to drill it out a little larger to fit the axle diameter. And I drilled new holes in the plate mount to raise the plate up higher on the mount.