turn signals inop
-
- Tricycles are Cool
- Posts: 14
- Joined: Wed Jun 22, 2016 4:19 pm
- My Bike: vs800 vs1400 harley
- Location: Lake Stevens WA
turn signals inop
My latest project, a 94 vs800, has a problem with the turn signals that give me one flash then nothing. the parts fiche at partszilla lists that relay as a sidestand relay. Could someone provide me with a reliable part number I can order with? Any help would be greatly appreciated, Rusty
-
- Joined a 1100cc Club
- Posts: 5500
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
Re: turn signals inop
38610-45D01 is the part number. Shop around for the best price.
Before you buy one check / change all your bulbs.
Relay is behind the left side cover.
Before you buy one check / change all your bulbs.
Relay is behind the left side cover.
-
- Tricycles are Cool
- Posts: 14
- Joined: Wed Jun 22, 2016 4:19 pm
- My Bike: vs800 vs1400 harley
- Location: Lake Stevens WA
Re: turn signals inop
Thankyou Nav, it's been a pleasure doing business with you. Found one on amazon. Hope that's the problem. If not then I got a lot of connector checking to do. Have had problems with dirty connectors/pins in the past. Rusty
- hillsy
- Joined a 1200cc Club
- Posts: 8846
- Joined: Wed Sep 17, 2014 12:43 am
Re: turn signals inop
Re: checking your bulbs - if someone has replaced the bulbs / indicators with lower wattage bulbs this can cause the relay to not work. They should be 21W bulbs - a lot of the aftermarket ones are 10W.
Or get a no-load / LED relay.
Or get a no-load / LED relay.
-
- Tricycles are Cool
- Posts: 14
- Joined: Wed Jun 22, 2016 4:19 pm
- My Bike: vs800 vs1400 harley
- Location: Lake Stevens WA
Re: turn signals inop
Thanks , I will check that out. ,Rusty