Crank Case Vent with Pods
-
- Joined a 1100cc Club
- Posts: 5500
- Joined: Thu Dec 29, 2016 12:33 pm
- My Bike: VS800
- Designer
- Joined a 1200cc Club
- Posts: 17454
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: Crank Case Vent with Pods
Discussing these points of this issue with you seems worthy.FallenAngel wrote: ↑Sun Sep 05, 2021 9:59 amHerb Discussing anything with you and Designer is like herding cats.
Crank case ventilation is impotent regardless of HOW it is vented
The topic "Crank Case Vent with Pods" is the discussion
Designer posted a solution of how he vented the crank case with pods by cutting a small hole and attached the tube. Done problem solved.
Hillsy suggested just venting to atmosphere another good suggestion that works. Done problem solved
The suggestion came up to vent after the carbs as the preferred method. Good suggestion
To address what you just said,...Yes! I agree as does we all ! Crankcase Ventilation IS Impotent....er,.... I mean IMPORTANT. ( see above)
However, The Discussion goes beyond merely that it is important. The Discussion delves into what methods are better than others specific to Intruders. Take for instance these two methods;
You even said which one of them would be preferred;Designer posted a solution of how he vented the crank case with pods by cutting a small hole and attached the tube. Done problem solved.
Hillsy suggested just venting to atmosphere another good suggestion that works. Done problem solved
And, for obvious reasons,...Vacuum Driven Positive Crankcase Ventilations IS a better "how" to do it.FallenAngel wrote: ↑Fri Sep 03, 2021 10:37 amI myself would not recommend just a long hose to atmosphere but instead connecting it to a vacuum source.
FallenAngel wrote: ↑Sun Sep 05, 2021 9:59 amI certainly hope Aequitas4 got the information he was looking for and maybe the suggestions provided here help him work out a solution that works for him
As you said;
FallenAngel wrote: ↑Fri Sep 03, 2021 10:37 amI myself would not recommend just a long hose to atmosphere but instead connecting it to a vacuum source.
- FallenAngel
- Joined a 950cc Club
- Posts: 2264
- Joined: Wed Apr 06, 2016 1:37 am
- My Bike: Suzuki Intruder 1400
- Location: Seattle,Wa
- Designer
- Joined a 1200cc Club
- Posts: 17454
- Joined: Tue Sep 16, 2014 8:34 am
- My Bike: Two 1400 Custom Made Choppers
Re: Crank Case Vent with Pods
At times yes,...at times no.
But always engaging.