Page 1 of 1
Screws
Posted: Fri Jul 30, 2021 9:05 am
by surass
Anyone know what size the battery box lid screws are?
Re: Screws
Posted: Fri Jul 30, 2021 10:04 am
by Designer
6mm x 1.0 thread, 10mm hex head drive...and I believe they are 12mm long.
Too long and they will crack your battery case.
Re: Screws
Posted: Fri Jul 30, 2021 11:34 am
by surass
That's strange mine are 5Mx1.0 Went to the store got 4M, 5M and 6M and 5M was the winner! Thanks!
Re: Screws
Posted: Fri Jul 30, 2021 12:29 pm
by Designer
I just went back and checked mine with a Calipers. and mine are 6mm O.D.
Hmmmm
Re: Screws
Posted: Fri Jul 30, 2021 12:35 pm
by surass
Designer wrote: ↑Fri Jul 30, 2021 12:29 pm
I just went back and checked mine with a Calipers. and mine are 6mm O.D.
Hmmmm
Hmmm what year is your bike and or your box?
Mine is a 2005
Re: Screws
Posted: Fri Jul 30, 2021 1:14 pm
by Designer
I just remembered!
I made a custom made Battery Box to relocate all my Electrics, ( Starter Solenoid, Relays, Turnsignal Flasher, MAP Sensor and the like) into the Space that once had the Crossover Pipe between the Stock Mufflers. At the same time, I replaced all Bolts everywhere with Stainless Steel Socket Heads that I polished to look like Chrome. Then is when I made for the fitment of 6mm Battery Box Lid Bolts.
So solly.
Re: Screws
Posted: Fri Jul 30, 2021 1:19 pm
by surass
No prob Mine is all OEM well cept for afew mods which are minor mode mods I used stainless 5MX1.0 Stainless Screws Philips Headed I got at the hardware store fit great and look nice and chrome shiny.
Re: Screws
Posted: Fri Jul 30, 2021 10:25 pm
by surass
Thanks Ride Hard!